00732M SCL901 SEA (20-45)
EASY Mode (for Beginners)
Even a beginner can easily make a recording using the EASY mode.
The EASY mode only operates in CAMERA mode.
1. Set the power switch to CAMERA mode (see page 18).
2. By pressing the EASY button, all the functions of the camera will be set to
off and the recording settings will be set to the following basic mode.
Battery level, recording mode, counter, date/time, DIS (
as the camcorder starts to run.
The word "EASY" will appear on the LCD at the same time.
However, the Date/Time will only be seen if it has been previously set.
) will be displayed on SCL906/L907 only)
3. Press the START/STOP button to start recording.
Recording will begin using the basic automatic environment settings.
4 Pressing the EASY button again turns the EASY mode off.
The camera will return to the settings that were set prior to the EASY mode being switched on.
In the EASY mode, the MENU, MF, DSE, P.AE and BLC functions are not available.
If you want to use these functions, you must first switch the EASY mode off.
The EASY mode settings are stored in the camera (provided a good lithium battery has been installed).
12/26/03 10:45 AM
) will be displayed
JAN. 31, 2004