Tv Link-Loader - LG 32LT560H Owner's Manual

8
INSTALLATION MENU
Aspect Ratio
Selects default aspect ratio at power up, see
settings below.
Set to 0 to disable. Aspect Ratio will stay at
previous state.
Set to 1 "Set By Program".
Set to 2 for 4:3.
Set to 3 for 16:9.
Setting is retained in non-volatile memory.
Level
The level means start volume level. (0 ~ 100)
Setting
The setting is a value between 1 and 7
corresponding to the number of hours desired.
Item Enable
Public Display Mode Yes
Power On default Yes
Input Source TV-MAX_INPUT
Tune Mode Virtual/Physical
Major No. Subject to Ch. Type
Minor No. Subject to Ch. Type
Aux Input Source Setting Yes
Input Source Aux Input (AV1-Max_Input)
Setting Enable / Disable
Minimum Volume
Maximum Volume
Start Volume Yes
Level
Power Management Yes
Setting
Key Management
Factory Reset
Aspect Ratio
Disable Initial
No No
No No
TV
Physical
2
0
No No
AV1
Enable
0 ~ 100 0
0 ~ 100 100
No No
0 ~ 100 20
No No
1 ~ 7 1
0 ~ 5 0
0 ~ 1 0
0 ~ 3 0

TV LINK-LOADER

Using the TV Link-Loader along with the USB
cloning procedure, an Installer can quickly set up
and clone multiple TV sets at a property. These
cloned TVs will all have the same Master TV
Setup: Public Display Mode Installation Menu
settings, User A/V settings and the Channel Map.
This newer procedure significantly decreases
the installation time that would be necessary if the
standard RS-232C method were used instead.
Receive from USB
* USB Restriction: NTFS format is not supported.
1
Plug USB memory card into the USB port of the TV.
2
Use the v or ^ button to select the TV Link-
Loader option and then press the OK button.
Installation Menu (V 2.6)
Public Display Settings
TV Link-Loader
Password Change
Set ID Setup
Configuration Setup
Pro:Centric
y y ImageyshownymayydifferyfromyyouryTV
3
Use the v or ^ button to select the Receive
from USB and press the OK button.
• Below explains the naming rules for .TTL files
The supported model line will be in the name
of the file but the screen size will be listed as
"xx".
This allows TVs having the same chassis
model number to use the same '*.TTL' file
without regard to the screen size.
ex) The name of '*.TTL' file is 'xxLH200C-
UA00000.TLL' for 32/37/42LH200C model.
TV Link-Loader
Receive from USB
Send to USB
TV Link-Loader
ꕣ
Previous
y y ImageyshownymayydifferyfromyyouryTV
OK
OK