6
INSTALLATION MENU
Accessing the Public Display Mode
Menu
1
Use the
button to select the Public
v or ^
Display Settings option and press the OK
button.
2
Once in the Public Display Settings menu,
use the
< > button to select and adjust
v ^
the menu options to your requirements. If you
want Public Display mode to be enabled, select
'Yes' for that option.
Installation Menu (V 2.6)
Public Display Settings
TV Link-Loader
Password Change
Set ID Setup
Configuration Setup
Pro:Centric
y y ImageyshownymayydifferyfromyyouryTV
Accessing the Public Display Mode
Menu by pressing and holding
down ENTER Button* on the TLL-
1100A Cloner
1
Press and hold the ENTER button for more that
5 seconds. The TV will automatically display
the Installation Menu after about 5-7 seconds.
* The TLL-1100A TV Link-Loader is not supplied
with this TV.
PUBLIC DISPLAY SETUP
Refer to the PDM menu options as described
below and on the following page. Then set the
options to your requirements.
1
Use the v or ^ or < or > button to select
desired menu option.
2
Use the OK button to return to previous menu.
3
Use the OK button to exit menu.
y y ImageyshownymayydifferyfromyyouryTV
OK
Public Display Mode Menu Items
Public Display Mode
If 'Public Display Mode' is set to Yes (Enabled), all
functions of the Public Display Settings are active.
If 'Public Display Mode' is set to No (Disabled), all
functions of the Public Display mode are not active.
Power On Default
This function allows you to determine the initial channel
number and external input when the TV is turned
On. This feature is useful for an in-house information
Installation Menu (V 2.6)
Public Display Settings
TV Link-Loader
Password Change
Set ID Setup
Configuration Setup
Pro:Centric
Public Display Settings
ꔊ
Yes
•
Public Display Mode
Yes
•
Power On Defult
TV
•
Input Source
Virtual
•
Tune Mode
•
12
Major
•
2
Minor
•
Aux Source Setting
No
•
Input Source
AV1
•
Setting
Enable
•
Minimum Volume
0
•
Maximum Volume
100
•
Start Volume
No
•
Level
15
•
Power Management
No
•
Setting
7
•
Key Management
0
•
Factory Reset
0
•
Aspect Ratio
0
ꕣ
Previous
OK
ꔋ
OK