Ninja BL680A Owner's Manual page 12

Assembly and Use for the Processor Bowl - cont.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.
USE
Fig. 1
USING THE CHOPPING BLADE ASSEMBLY
1
Holding the Chopping Blade assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the attachment fits around the gear shaft and that it is
standing straight.
2 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
3
Plug the power cord into the electrical outlet and press
on the power button ( ). Select the speed or Auto-iQ
program that best suits your needs. Pulse ingredients
for even chopping by holding the Auto-iQ
button until your desired consistency is reached.
NOTE: Please refer to "Speed Settings & Uses" chart
for suggested uses and speeds.
4 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)
5
To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
6
Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
CAUTION: If pouring from the bowl, ALWAYS
remove the blade assembly first before pouring.
7 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
11 1-877-646-5288
REMOVAL
Fig. 2 Fig. 3
1
2
3
™
Pulse
™
4
5
6
7
Fig. 4
USING THE DOUGH BLADE
Holding the dough blade by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the attachment
fits around the gear shaft and that it is standing straight.
(Fig. 5)
Add the ingredients and secure the bowl lid onto the bowl.
Plug the power cord into the electrical outlet and press
on the power button ( ). Select LOW/DOUGH on the
control panel and process until ingredients come
together to form a mass.
NOTE: Please refer to "Speed Settings & Uses" chart
for suggested uses and speeds.
Once finished making dough, stop the appliance by
pressing the power button ( ) and wait for the blade to
stop turning.
To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
USE
Fig. 5