Ninja BL680A Owner's Manual page 11

Assembly and Use for the Processor Bowl
WARNING: Never leave the appliance unattended while in use.
CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 5a
NOTE: Nutri Ninja
| Ninja
®
iQ Technology can sense which jar is on the motor
™
base. The function lights will illuminate depending on
which jar is placed on the motor base. (Fig. 1)
1
Holding the desired blade by the top of the shaft, place
it onto the drive gear inside the bowl. Ensure that the
attachment is seated properly and is standing upright.
(Fig. 2)
NOTE: The blade will fit loosely on the drive gear.
LOW /
DOUGH MED
CAUTION: Blades are not locked in place
2
Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3
Align and lower the Processor Bowl onto the motor
base. (Fig. 3) Handle should be aligned slightly to the
right of the "LOCK" symbol on the motor base.
4
Rotate the bowl clockwise until it locks in place, you will
hear a click when the lock is engaged. (Fig. 4)
5
The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 5a, Fig. 5b)
Fig. 1
LOW /
DOUGH MED
Fig. 5b
Blender System with Auto-
®
Fig. 2
Fig. 3
Fig. 6a
6
Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
7
Holding the lid by the handle in the upright position,
place it on top of the Processor Bowl aligning the
triangle ( ) located on the lid with the triangle ( )
located on the Processor Bowl handle. (Fig. 6a) Press
the handle down until you hear a click. The triangles on
the lid and the Processor Bowl handle MUST be aligned
in order for the blender to turn on. (Fig. 6b)
NOTE: The 64 oz. bowl is not intended for blending
drinks. Do not overfill.
NOTE: To add liquids during blending, open the drizzle
hole on the top of the lid and pour the liquid slowly into
the mixture.
8
Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the bowl and lid are not installed correctly.
When the bowl and lid are installed properly, the
power button ( ) will be solid, indicating that the
appliance is ready for use.
Fig. 4
Fig. 6b
LOW /
MED
DOUGH
www.ninjakitchen.com 10