Table of Contents
Advertisement
2.2
CONNECTING TO PROSCAN III
Switch off the ProScan III unit.
Plug the RS232 plug into one of the two RS232 sockets on the back of the ProScan III unit as
indicated below.
Switch on the ProScan III unit.
The Control Centre will power up and display "PRIOR" while starting up.
The Control Centre will now display one of the relevant accessory screens from the following
sections or the settings menu if no accessories are attached to the PS3.
The Control Centre is ready to use.
Page 5
RS232
Sockets
on
ProScan
III
Advertisement
Table of Contents
