Table of Contents
Advertisement
Page 21
Section 6
TROUBLESHOOTING
6.1
TROUBLESHOOTING
Checking your Joystick is centred and your buttons work.
To enter this mode, hold down Menu button on start-up.
X and Y is the displacement of the Joystick in X and Y.
L is the displacement of the digital encoder wheel on the left hand side.
R is the displacement of the digital encoder wheel on the right hand side.
Pushing the six buttons will change the associated triangle on the lower part of the screen to an
upside down solid triangle.
Problem:
Control Centre does not power up on start-up.
Solution:
Check connections with ProScan III, and power off and power on ProScan III.
Problem:
Sections of the Control centre do not respond, i.e., Joystick, or the wheels.
Solution:
Check the software to ensure they are not deactivated. (H and J commands)
(If the Joystick is deactivated it will display "Deactivated" on the screen.)
Page 21
Advertisement
Table of Contents
