Table of Contents
Advertisement
3.4
TTL
The TTL functionality of the ProScan III can be tested via the Control Centre, this is designed to
allow users to test the output of the system.
Scroll with the left hand wheel to select which TTL output is required.
Button Functionality:
Button 1: Exit setting menu
Button 2: None
Button 3: Send Pulse, (direction selected by button 4)
Button 4: Put signal High or Low.
3.5
JOYSTICK UNITS
The units of the joystick can be converted from the default value of microns into inches.
In the settings menu scroll with the left hand wheel until you come to the units menu
With the right hand wheel scroll backwards to select inches, scroll forward to return to microns.
Page 17
Advertisement
Table of Contents
