Speed And Direction Settings; Encoders - Prior Scientific PS3J100 User Manual

3.2

SPEED AND DIRECTION SETTINGS

The Stage and Joystick speed can be set here in the control centre, this affects the speeds stored
and used in the ProScan III.
Press Button1 (Menu) to Exit settings menu.
Stage speed refers to the speed of the axis under computer control
Joy speed refers to the speed of the axis under Joystick Control
Stage direction refers to which direction is –ve and +ve when controlled via computer
Joy direction refers to which direction is –ve and +ve when controlled via Joystick (Change this to
changed the handedness of the Joystick).
Scroll to the option you require using the left hand wheel then change the option using the right
hand wheel.
3.3

ENCODERS

3.3.1 Encoder Settings
Scroll the left wheel to Stage, for XY encoders only available if encoder connected and detected
by ProScan III.
Scroll the left wheel to Focus, for Z encoders only available if encoder connected and detected by
ProScan III.
Button Functionality:
Button 1: Exit to main Menu
Button 2: none
Button 3: Toggle Encoder on / off
Button 4: Toggle Servo on ./ off
Encoder active means the encoder is used to provide positional feedback.
Servo active means the axis will attempt to remain at the given position.
Page 16
Page 17
Page 17