Honda 2018 Jazz Manual page 88

uuIndicatorsu
Indicator Name
Charging System
Indicator
Seat Belt Reminder
Indicator
*1 : Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
*2 : Models with multi-information display
* Not available on all models
86
On/Blinking
Comes on when you turn the ignition
●
( w
*1
switch to ON , and goes off when
the engine starts.
Comes on when the battery is not
●
charging.
Comes on and the beeper *
●
you are not wearing a seat belt when
you turn the ignition switch to ON
( w
*1 .
Blinks while driving if you have not
●
fastened the seat belt. The beeper
sounds and the indicator blinks at
regular intervals.
Models with front passenger's seat belt
reminder
If the front passenger is not wearing a
●
seat belt, the indicator comes on about
a few seconds later.
Blinks while driving if the front
●
passenger has not fastened a seat belt.
The beeper sounds and the indicator
blinks at regular intervals.
Explanation
Comes on while driving - Turn off
●
the heating and cooling system
climate control system
demister in order to reduce electricity
consumption.
2 If the Charging System Indicator
Comes On P. 504
sounds if The beeper * stops and the indicator
●
goes off when you fasten the seat belt.
Stays on after you have fastened
●
the seat belt - A detection error may
have occurred in the sensor. Have your
vehicle checked by a dealer.
Models with front passenger's seat belt
reminder
The beeper stops and the indicator
●
goes off when the front passenger
fastens their seat belt.
Stays on after the front passenger
●
has fastened the seat belt - A
detection error may have occurred in
the sensor. Have your vehicle checked
by a dealer.
2 Seat Belt Reminder P. 39
Message *2
*
/
* and rear