Honda 2018 Jazz Manual page 453

Clip
Cover
Screw
Bulbs
Coupler
Tab
* Not available on all models
Models with LED type headlights
1. Remove the screws using a Phillips-head
screwdriver and remove the holding clips
using a flat-tip screwdriver.
2. Pull the under part of the inner fender cover
down.
3. Push the tab to remove the coupler.
4. Rotate the old bulb to the left to remove.
5. Insert a new bulb into the fog light
assembly and turn it to the right.
6. Insert the coupler into the connector of the
bulb.
uuReplacing Light BulbsuFog Light Bulbs
1Fog Light Bulbs
*
Holding clip
Insert the clip with the central pin raised, and push
until it is flat.
Central Pin
Insert a flat-tip screwdriver, lift and remove the
central pin to remove the clip.
Push until the
pin is flat.
*
451