LandAirSea Tracking Key/Pro ® User Guide
1
folder location on your computer, other than the default
location. You can manually set the connection path to Past
Track.
2
done automatically in the Past Track program, but you can
set the port for troubleshooting purposes.
3
change the various filters for your device if necessary, but it
is best to leave the default settings.
4
troubleshooting and is best left unchecked.
5
device records data. Default is 1 second. Maximum sampling
rate is 5 seconds.
6
after 2 minutes to extend battery life. You can disable Power
Saving mode if you would like your device to record
continuously. NOTE: Disabling the power saving mode will
drastically reduce the battery life as the device will no longer
go to sleep.
7. Restores all Firmware Settings to original factory settings.
If you choose to install Google Earth® in another
Set the port selection for your GPS device. This is
Set data filters for your individual needs. You can
File Open/Save dialog. This setting is also used for
You can set the sampling rate at which your GPS
In Power Saving Mode, our GPS device goes to sleep
LandAirSea, Inc | User Guide 2010
20