System Wiring - AccuAir ENDO-CVT23 Instruction Manual

CVT ADAPTER HARNESS
Figure 4: CVT Adapter harness
RE-PINNING E-LEVEL
MAIN HARNESS CONNECTOR
Replace with Tank Pressure OUT
Adapter Harness Green Wire
1 2 3 4
9 10 11 12 13 14 15 16
BACK OF CONNECTOR
Replace with Comp Trigger IN
Adapter Harness Yellow Wire
Plug Terminals #6 and #13
BACK OF CONNECTOR
T_W
1_Black to Eye-Let EC_GND
2_
3_
4_
5_
6_Red (P-SENS) PLUG
7_Green (Tank Pressure)
8_Purple HEADLIGHTS
Figure 5: Re-pinning e-Level™ main harness connector
ENDO-CVT Instructions V 1.2
STATUS INDICATOR
LIGHT
NOTE: This harness can be re-oriented for non standard CVT vehicle orientations.
5 6 7 8
T= Terminal W= Wire
9_
10_
11_
12_Yellow to COMP Trigger IN
13_Black (P-SENS) PLUG
14_Orange IGN_12V
15_
16_Red to 10 Amp Fuse
Re-Pin Into e-Level Main Harness Connector
Comp Trigger IN
Tank Pressure OUT
12 in
8-Pin ADAPTER HARNESS
1.) Up 4
2.) Up 3
3.) Up 2
4.) Up 1
5.) Down 4
6.) Down 3
7.) Down 2
8.) Down 1
REMOVING & REPLACING AN MX150 WIRE
STEP #1
STEP #4
STEP #7
STEP #10
Figure 6: Removing & replacing an MX150 wire
Page 6
M8 to CVT Connector
<12V Digital IN>
<0.5-4.5V DAC>
(8) UP/DN
1/2/3/4
<12V Digital IN>
White/Black
White/Orange
White/Purple
White
White/Gray
White/Green
White/Brown
White/Blue
STEP #2
STEP #3
STEP #5 STEP #6
STEP #8 STEP #9
STEP #11
AccuAir Suspension 2018