Method Of Disposal Of Waste And Rejected Product - Accont SAHARA Type I. Operation Manual And Warranty

effect, through the inspection opening check the condition of the sediment of
impurities and carbon particles in the internal section of the stove upon the nearest
occasion, when the stove is out of operation and cold. Accordingly, take relevant
measures (according to the chapter on stove cleaning - in an extreme case, an
unsuitable objects from above can fall down to the chimney, e.g. a bird, etc.)
c. After every heating season, make the complete maintenance of the stove and
thoroughly check for possible damage or cracking of any stove section.
d. Should you find out at any time the stove is cracked on any place, immediately stop
using it and call the nearest authorised servicing organisation and report the failure.
e. Regularly check the stove seals. The relevant stove seals should be replaced as
needed (it does not meet its function if damaged or pressed out, if there is a fumed
spot on the surface of the stove anywhere around the seal).
In the case the seal replacement is necessary, call the relevant authorised servicing
organisation.

METHOD OF DISPOSAL OF WASTE AND REJECTED PRODUCT

According to the Act No. 125/1997 Coll. and the related regulations, we propose the
following method of the disposal of packaging and the redundant rejected product:
Packaging:

Put the plastic packaging to the sorted waste container.

Use the wood parts of the packaging as a fuel when making fire.

Deliver the holders and screws to the secondary raw material collecting organisation.

Put the packaging with moisture absorbent to the container with hazardous waste.
The redundant rejected product:

Deliver the metal parts to the secondary raw material collecting organisation.

Pour the glass fragments from the stove, disassemble the door glass and put
them together to the sorted waste container.

Put the ceramics and seals to the municipal waste container.
WARRANTY AND CLAIM CONDITIONS
-23-