USB Interface
Using USB Interface
Transferring a Digital Image through a USB Connection
The DVD Camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification)
You can transfer a recorded file in memory Card to a PC via a USB connection.
If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0) supplied with the DVD
Camcorder.
USB Connection Speed depending on the System
High speed USB connection is supported by Microsoft (Windows) device drivers only.
Windows 98SE/ME - Full Speed USB
Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.
Windows XP- High speed USB on a system with Service Pack 1 or later installed.
System Requirements
Minimum
CPU
Intel® Pentium III™, 600MHz
OS(Operating System)
Windows® 98SE/ME
Memory
128MB
HDD capacity
1GB or more
Resolution
1024 x 768 dots 24bit Color
USB
USB1.1
USB interface between the DVD Camcorder and a Mac is not possible.
Operations are not guaranteed for all of the recommended computer environments mentioned above.
Windows System
Recommended
Intel® Pentium 4™ , 2GHz
Windows® 2000/XP
512MB
2GB or more
1024 x 768 dots 24bit Color
USB2.0 High Speed
ENGLISH
111