Setting The File Number (File No.) - Samsung SC-DC164 Owner's Instruction Manual

ENGLISH
Digital Still Camera Mode

Setting the File Number (File No.)

 File Number setting works only in M.Cam Mode. page 26
 File Numbers are given to images in the order they were recorded when they are stored on the Memory Card.
 File numbers may be set as follows:
- <Series>: When there are existing files, the new image will be named as the next number in the sequence.
- <Reset>: When there are no files stored on the Memory Card, the file numbering starts from 0001.
1. Set the [Mode] switch to [CARD].
2. Set the [Power] switch to [
3. Press the [MENU] button.
 The menu list will appear.
4. Move the [Joystick] up or down to select <Memory>, then press the [Joystick(OK)].
5. Move the [Joystick] up or down to select <File No.>, then press the [Joystick(OK)].
6. Move the [Joystick] up or down to select desired option (Series or Reset), then press
the [Joystick(OK)].
 The selected option is applied.
7. To exit, press the [MENU] button.
96
(Camera)].
4
M.Cam Mode
►Memory
Photo Quality ►Super Fine
File No.
►Series
Move OK Select MENU
6
M.Cam Mode
►Memory
Photo Quality
File No. Series
Reset
OK MENU
Move Select
Exit
Exit