Lane Keeping Assist System (Lkas) - Honda Accord 2018 Hybrid Owner's Manual

DRIVING
You can temporarily increase the
vehicle speed. In this case, there is
no audible or visual alert even if a
vehicle is in the ACC with LSF range.
ACC with LSF stays on unless you
cancel it. Once you release the
accelerator pedal, the system
resumes an appropriate speed for
keeping the following interval while a
vehicle ahead is within the ACC with
LSF range.
If the vehicle ahead of you slows down abruptly, or if another vehicle
cuts in front of you, the beeper sounds, a message appears on the driver
information interface, and the head-up warning lights* flash.
Canceling ACC
n
Press the CANCEL, MAIN button, or
press the brake pedal. The ACC with
LSF indicator goes off.
Certain conditions may cause ACC
to cancel automatically. When this
happens, the amber ACC indicator
appears on the driver information
interface.
After adaptive cruise control has been canceled, you can still resume the
prior set speed by pressing RES/+ when your vehicle speed is over 25 mph
(40 km/h).
WARNING
ACC with LSF has limited braking capability and may not stop your vehicle
in time to avoid a collision with a vehicle that quickly stops in front of you.
Always be prepared to apply the brake pedal if the conditions require.
Important Safety Reminder
As with any system, there are limits to ACC with LSF.
Use the brake pedal whenever necessary, and always keep a safe interval
between your vehicle and other vehicles.
128 |
Head-up
warning*
Beep
Main button
Cancel button
*if equipped
WARNING
Exiting a vehicle that has been stopped while the ACC with LSF system is
operating can result in the vehicle moving without operator control.
A vehicle that moves without operator control can cause a crash,
resulting in serious injury or death.
Never exit a vehicle when the vehicle is stopped by ACC with LSF.

Lane Keeping Assist System (LKAS)

Provides steering input to help keep the
vehicle in the middle of a detected lane
and provides tactile and visual alerts if
the vehicle is detected drifting out of its
lane while driving between 45–90 mph
(72–145 km/h).
The LKAS only alerts you when lane
drift is detected without a turn signal
in use.
Rapid vibrations on the steering wheel and a warning display alert you that
the vehicle is drifting out of a detected lane. The system applies torque to the
steering to keep the vehicle between the left and right lane lines. The applied
torque becomes stronger as the vehicle gets closer to either of the lane lines.
When the vehicle nears a white or yellow line, steering force of the electric
power steering will become stronger.
Turning the System On or Off
n
Press the MAIN button. LKAS appears in the driver information interface.
Press the LKAS button. Lane outlines appear on the driver information
interface. Dotted lane lines turn solid when the system activates.
Press the MAIN button or the LKAS button to turn the system off.
Main button
DRIVING
LKAS button
*if equipped
| 129