Honda Accord 2018 Hybrid Owner's Manual page 30

VEHICLE CONTROLS
Folding Down the Rear Seats
n
The rear seat-backs can be folded down to accommodate bulkier items in the
trunk.
1. Remove the center shoulder belt
from the guide.
Guide
Center
Shoulder Belt
3. To lock a seat-back upright, push it
backwards until it locks.
When returning the seat-back to
its original position, push it firmly
back. Also, make sure all rear
shoulder belts are positioned in
front of the seat-back, and the
center shoulder belt is
re-positioned in the guide.
Make sure all items in the trunk or items extending through the opening into
the rear seat is properly secured. Loose items can fly forward if you have to
brake hard.
Adjusting the Steering Wheel
The steering wheel height and distance from your body can be adjusted so that
you can comfortably grip the steering wheel in an appropriate driving posture.
1. Push the steering wheel adjustment
lever down. The steering wheel
adjustment lever is under the steering
column.
2. Move the steering wheel up or down,
and in or out. Make sure you can see the
instrument panel gauges and indicators.
3. Pull up the steering wheel adjustment
lever to lock the steering wheel in
position. After adjusting the position,
make sure you have securely locked the steering wheel in place by trying to
move it up, down, in, and out.
52 |
2. Pull the release lever in the trunk to
release the lock.
Release Lever
To lock
Lever
To adjust
WARNING
Adjusting the steering wheel position while driving may cause you to lose
control of the vehicle and be seriously injured in a crash. Adjust the steering
wheel only when the vehicle is stopped.
Driving Position Memory System*
You can store two driver's seat (except for power lumbar) with the driving
position memory system. When you unlock and open the driver's door with
smart entry remote, the seat adjusts to retracted positions of one of the two
preset positions automatically. The seat will move to the stored position when
you set the power mode to ACCESSORY.
When you enter the vehicle, the driver information interface briefly shows you
which remote transmitter you used to unlock the vehicle.
• DRIVER 1 transmitter is linked to memory
button 1.
• DRIVER 2 transmitter is linked to memory
button 2.
The driver's seat moves rearward depending on the set seating position once you:
• Stop the vehicle.
• Put the transmission in P.
• Set the power mode to VEHICLE OFF.
• Then open the driver's door.
Once the power mode is in the ACCESSORY position, the driver's seat moves
forward to the DRIVER 1 or 2 preset position.
1. Set the power mode to ON. Adjust the
driver's seat to the desired position.
2. Press the SET button.
You will hear the beeper and the memory
button indicator light will blink.
3. Press memory button 1 or 2 within five
seconds of pressing the SET button.
Once the seat position has been
memorized, you will hear the beeper
twice, and the indicator light on the
button you pressed stays on.
Press memory button 1 or 2 to recall a stored position.
VEHICLE CONTROLS
DRIVER 1 DRIVER 2
Memory
Button 2
Memory
Button 1
SET Button
*if equipped
| 53