Table of Contents
Advertisement
To enter a destination by entering the street name
first:
1. Press the DEST hard key.
2
2. Select the
Address Entry screen button.
3. Select the state/province screen button,
if needed, to change the current state or
province. Enter the name or enter the
two-letter abbreviation. A list will display or
select the List screen button and select
the state or province.
4. Select the Street screen button and start
entering the street name or select the Last
5 Streets screen button.
The Last 5 Streets screen will display a list
of the last five street names that had been
entered. Select a street from the list and it will
appear in the Street name area.
If using the alpha keyboard, finish entering the
street name. If five or less names are available,
a list will display. If more than five are available,
the List screen button will have a number in it
that represents the number of available streets.
Select this button to view the list and select
a street.
5. Once a street has been selected, select the
House # screen button to enter the house
number. The system will display the house
number range that is available for the street.
6. Select the Go screen button. The map screen,
with the destination marked, will display.
7. Once the house number is selected, the city
name will automatically populate. If there is
more than one city available for selection,
a list of cities will display. Select the city.
8. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
9. Select the Start Guidance screen button.
You are now ready to start your route.
See "Getting Started on Your Route" later in
this section for more information.
31
Advertisement
Table of Contents
