Table of Contents
Advertisement
Entering a Point of Interest (POI)
To set a destination by entering a Point of
Interest (POI):
1. If the radio is already on with a map disc
inserted, skip to Step 5.
2. Press the
(power) knob to turn the
O
system on.
3. Insert the DVD map disc. See "Installing the
Map DVD" under Maps on page 19 for more
information.
4. A caution may appear. Select the OK screen
button to proceed.
5. Press the DEST hard key.
i
6. Select the
Point of Interest screen button.
7. Select the state/province screen button,
if needed, to change the current state or
province. Enter the name or enter the
two-letter abbreviation. A list will display or
select the List screen button and select
the state or province.
8. Enter the specific title of the POI in the POI
name space (i.e. Washington Monument).
If five or less names are available, a list will
display. If more than five are available, the List
screen button will have a number in it, it
represents the number of available POIs.
Select this button to view the list.
9. Select the Go screen button next to the POI.
A map screen, with the destination marked,
will appear.
10. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
11. Select the Start Guidance screen button.
You are now ready to start your route.
See "Point of Interest (POI)" under Destination on
page 29 for more information.
11
Advertisement
Table of Contents
