Table of Contents
Advertisement
5. Press the DEST hard key.
6. Select one of the available preset destination
screen buttons. A map screen, with the
destination marked, will appear.
7. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
8. Select the Start Guidance screen button.
You are now ready to start your route.
See "Preset Destination" under Destination on
page 29 for more information.
Canceling Guidance
Guidance will be canceled once you arrive at your
final destination. To cancel guidance prior to
arrival at the final destination:
1. Press the DEST hard key.
2. Select the Cancel Guidance screen button.
3. A pop-up confirmation will appear. Select OK
to cancel guidance or Cancel to cancel the
request.
Guidance Volume
To adjust the volume of voice guidance prompts:
1. Press the MENU hard key to enter the
menu options, then press the MENU key
repeatedly until Nav is selected or select the
Nav screen button.
2. Select the Voice Prompt screen button.
3. Select the On screen button if voice guidance
is not on.
4. Select the + (plus) or – (minus) screen
buttons to increase or to decrease the volume
of the voice prompts. The system will
respond with the adjusted voice level.
See "Voice Prompt " under Configure Menu on
page 45 for more information.
Turning the
(volume) knob during a voice or
O
navigation prompt will also change the volume.
Cleaning the Video Screen
When cleaning the video screen, use only a soft
clean cotton cloth dampened with clean water.
13
Advertisement
Table of Contents
