Table of Contents
Advertisement
basic operation of the camcorder
Checking the remaining battery and recording capacity
• When the power is off, press and hold the Display (
/iCHECK) button.
• When the power is on, press and hold the Display (
/iCHECK) button for about 3 second.
• The remaining battery time and the available recording
time appear for about 10 seconds according to the
storage and quality setting values.
• Battery information is available only when the battery pack is inserted in your camcorder.
• If the camcorder is connected by using the AC Power adaptor, and the battery is not
inserted, the "No Battery" message appears.
USING THE TOUCH PANEL
The touch panel allows you to enjoy playback and recording with a simple touch of your
finger. Place your hand on the rear side of the LCD screen to support it.
Then, touch the items displayed on the screen.
• Do not place a protective film on the LCD screen.
• If a film is applied for a long while, strong cohesion on the surface of the screen may
cause a malfunction of the touch panel.
• Be careful not to accidentally press the buttons near the LCD panel while using the touch
panel.
• The tabs and indicators that appear on the LCD screen depend on the current recording/
playback status of your camcorder.
90
STBY
00:00:00
[55Min]
MIN
Touch panel
Remaining battery (approx.)
Battery
90 Mn
0%
Card
([HD] 1080/60i SF)
90Mn
Available recording
time (approx.)
Remaining battery (approx.)
100%
Advertisement
Table of Contents
