Quantum QR4 Quick Manual

PROGRAMMING FUNCTION CODES TABLE

Exit program, hold for 1 second
to hang-up call
Save program or initiate
program
00 Change master code (0000 is
default)
01-20 Add individual access code for
relay 1
21-40
Add individual access code for
relay 2
41-50 Add individual access code for
relay 1 & relay 2
51 Relay 1 open time interval (01-
90 seconds) default 12
seconds
52 Relay 2 open time interval (01-
90 seconds) default 12
seconds
60
Delete all access codes 01-20
61 Delete all access codes 21-40
62 Delete all access codes 41-50
65 Delete all access codes
70
Direct call forwarding, phone
number up to 11-digit.
71-72 Automatic or manual call
forwarding, phone number up
to 11-digit
76 Delete phone number on 70,
71 and 72
87 Disable or enable automatic
call forwarding. 0= disable
(default), 1= enable
88 Select automatic call
forwarding 71 or 72
89 Select automatic call
forwarding time 15-90
seconds. Default= 15
seconds.
90 Manually close or open relay
1. 1= open, 0= close
91 Manually close or open relay
2. 1= open, 0= close
92 Talk time 10-90 seconds.
Default= 60 seconds
93 Lock-out count 03-09.
Default= 03
94 Auxiliary input.
0= disable
1= enable control by door
open interval function code
51.
2= enable control by auxiliary
input.
95 Alarm Mode
1= enable
0= disable
Default= 10 seconds local
alarm.
Default= 30 seconds remote
96 System answer mode
0= disable, default
1-9= enable 1- 9 rings, when
enable no call waiting feature.
97 Do not disturb mode
0= disable, default
1= enable
98
Select initiating premise call
key
0= *
1= #, default
99 Set memory to factory default,
then press 1# to confirm.
Download Complete Installation and Programming Manual at
 Missing Parts, contact Pach and Company 1-888-678-7224
 Defective system under manufacturer warranty, call 1-888-678-7224 for
advance replacement

24 Months warranty

6 Months warranty
labor
 Installation and programming manual, download at
WARNING:
TO POWER A DOOR STRIKE OR MAGNETIC LOCK
SEPARATE POWER MUST BE USED TO POWER A DOOR
STRIKE OR MAGNETIC LOCK.
Technical support is available Mon-Fri 7:00-4:00PM PST at 1-888-678-7224
www.pach‐co.com
for complete system, does not include installation labor
for Printed Circuit Board, does not include installation
DO NOT USE ON BOARD 12VDC and GND
Complete manual is available at www.pach-co.com
www.pach-co.com