D-Link ShareCenter Pro 1100 Quick Installation Manual page 7

When first powered on, during the initial boot sequence, the ShareCenter® Pro will wait
to be assigned an IP address via DHCP. If it does not receive a DHCP assigned IP address, by
default it will have an auto-assigned IP address of 169.254.x.x (where "x" is dynamic). It is
recommended to use the included D-Link EZ Search Utility when accessing and configuring
the ShareCenter® Pro for the first time. If you want to change the IP address before logging
in or are unable to connect to the ShareCenter® Pro IP address, you can use the EZ Search
Utility provided on the product CD to locate the device on your network and make any needed
changes.
Network Storage
Device
Refresh
Configuration
LAN
Apply
iSCSI Drive Mapping
Connect
Management
Drive Mapping
Available Drive
Letters
About
Exit
D-Link DNS-1100-04 Quick Installation Guide
4. Configuration with Wizard
EZ Search Utility
The EZ Search Utility displays any ShareCenter® Pro devices it detects on the
network here.
Click Refresh to refresh the device list.
Click Configuration to access the Web based configuration of the ShareCenter®
Pro.
Configure the LAN Settings for the ShareCenter® Pro here.
Click Apply to save changes to the LAN Settings.
Displays the available iSCSI targets on ShareCenter® Pro.
Click Connect to connect to the iSCSI target.
Click Management to edit the information.
Volumes available for mapping are displayed here.
Select an available drive letter. Click Connect
to map the selected volume. Click Disconnect
to disconnect the selected mapped volume.
Click About to view the software version of
the EZ Search Utility.
Click Exit to close the utility.
7