Tenda AV1000 User Manual page 34

release it. The
that it is negotiating with other adapter.
Observe the three adapters' LED status. If all
3.
adapters display solid, that indicates Adapter 3 has joined Network1
successfully.
C. To disconnect an adapter from the existing powerline network, do as
follows:
As displayed above, a private powerline network has been created within
Adapter1, 2 and 3. And now you want to disconnect Adapter 3 from
Network1. Do as follows:
Press the Pair button on Adapter 3 for at least 6 seconds and then release it.
The LED on Adapter 3 will blink three times, which indicates the
Adapter 3 will exit from Network 1, reset to the default settings and restart.
LED on Adapter 3 starts blinking, which indicates
30
AV1000 Gigabit Powerline Adapter
LEDs on three