Led/Interface/Button - Tenda PH3 AV1000 User Manual

3 LED/Interface/Button

LED Color
/
Power
Green
Green
/
Green
PLC
Green
Red
/
Ethernet
Green
Interface/Button Description
For connecting to the Internet, a computer, or other network devices via an Ethernet
Ethernet Port
cable.
Press and hold it for about 1 second to start pairing.
Pair
Press and hold it for about 6 seconds (the Power LED will be off and then light up
again) to restore the adapter to factory default.
2
Ethernet Port Pair Button
Status
Off The device is NOT receiving electrical power.
Solid The electrical power is on.
Slow blinking The device is in power saving mode.
The device doesn't pair with other powerline devices, or is
Off
powered off.
Solid The device is connected to a powerline network.
Fast blinking The device is pairing with a powerline devices.
The powerline signal of the adapter is poor; try plugging the
Solid adapter closing to your router or modem until the PLC LED
turns to green.
Off No Ethernet cable is detected on the Ethernet port.
Solid The Ethernet cable is connected properly.
I Get to Know the Adapter
Power LED
PLC LED
Ethernet LED
Description