Pressing JAM (F5) shows this screen:
This page allows you to set how the PORTADRIVE jams timecode. Only one parameter is available:
JAM SOURCE There are two options:
EXTERNAL
TIME OF DAY Allows you to jam to 'time of day' (TOD) timecode from the real time
Please note:
Jamming of TC and user bits is only possible if:
1) TC MODE in the GEN TC page is set to FREERUN. If any other TIMECODE MODE is selected, an
error message will be displayed.
2) There is a valid SMPTE LTC signal at the timecode input. If there is no valid timecode, an error
message will be displayed.
The rest of the JAM screen simply displays internal/external user bits and timecode status.
Version 1.31
You can 'jam' the PORTADRIVE's timecode to external timecode, this
will often be from a 'master' timecode source that is the reference for
all audio and video recordings.
clock in the PORTADRIVE, this has no reference to any external time.
TOP PANEL MODES
97