General Safety Warnings - Ryobi RLM30 Original Instructions Manual

GENERAL SAFETY WARNINGS

Warning: Be sure to read and
understand all instructions in the
manual before using this product.
Failure to follow all instructions
may result in hazardous radiation
exposure. SAVE THESE
INSTRUCTIONS.

Warning: Do not attempt to modify
the performance of the laser device
in any way. This may result in
a dangerous exposure to laser
radiation.

Warning: Laser radiation. Do not
stare into the beam. Turn the laser
beam on only when using this tool.
Always turn off laser when not in
use.

Warning: Use of controls,
adjustments, or the performance
of procedures other than those
specified in the manual may result in
hazardous radiation exposure.

Warning: The use of optical
instruments such as, but not limited
to, telescopes or binoculars to view
the laser beam will increase the
hazard for serious eye injury.
This measuring tool has a built-in laser
light. The laser is a Class 2 product and
emits output power of maximum 1mW
and 650nm wavelength.
The following label is on your digital
laser distance measurer. Be aware
of the laser light location when using
the tool. Always make sure that any
bystanders in the vicinity of use are
made aware of the dangers of looking
directly into the laser.
Do not remove or deface any product
labels.

Warning: Avoid direct eye
exposure. The laser beam can
cause flash blindness.

Warning: The digital laser
distance measurer is not a toy.
Always keep it out of the reach
of children. The laser light emitted
from the device should never be
directed toward any persons or
animals for any reason. Never
aim the laser at vehicles. You may
distract the driver.

Warning: Do not operate the tool
around children or allow children to
operate the tool.

Warning: Do not place the tool in
a position that may cause anyone
to stare at the beam, whether
intentionally or unintentionally.

Warning: Do not aim the laser
beam at surfaces that are shiny or
reflective. The reflective surface
could reflect the beam back at the
operator or other persons.

Warning: If damaged, do not
attempt to repair or disassemble the
laser measuring tool. If unqualified
persons attempt to repair this
product, serious injury may occur.
Any repair required on this laser
Safety
1