Pioneer AVH-X5800DAB Firmware Update Instructions page 3

8. The "Firmware Update" screen appears. Touch [Continue], next read the "WARNING,"
then touch the [Start] button to start the update process. If it shows "ERROR" on the
display, try another USB device.
9. When the update starts, a progress bar is displayed. When the update is complete the
display will show "It succeeded."
10. The product will reboot after the update is finished. Do not touch anything even when
the screen is blacked out. After it has finished rebooting, the screen will return to the
menu screen.
11. The firmware update is now complete. Your Pioneer DVD Receiver is now ready for use.
Firmware Update FAQ
Q: What if my set does not switch on automatically after updating the software or starts up
more than once?
A: Turn off the ignition key and turn on again – the set should start up now.
Q: What if I cannot upgrade my set / the set does not show the start up screen after more than
1 attempt?
A: Please contact your local Pioneer service organisation for a product check-up.
Contact Information
Pioneer Customer Support Center
http://www.pioneer.eu
------------------------------------------------------------
Copyright(c) 2016 Pioneer Corporation