Common Macintosh Problems - Samsung SCX-6322DN User Manual

Problem Possible Cause and Solution
The machine does not • Check if a document is loaded into the
scan
machine.
• Check if your machine is connected to
the computer. Make sure if it is
connected properly if I/O error is
reported while scanning.
• Check if the port is not busy. Since
functional components of MFP (printer
and scanner) share the same I/O
interface (port), the situation of
simultaneous access of different
"consumer" application to the same port
is possible. To avoid possible conflicts,
only one of them at a time is allowed to
gain control over the device. The other
"consumer" will encounter "device busy"
response. This can usually happen while
starting scan procedure, and appropriate
message box will be displayed.
To identify the source of the problem,
you should open ports configuration and
select the port assigned to your scanner.
port's symbol /dev/mfp0 corresponds to
LP:0 designation displayed in the
scanners' options, /dev/mfp1 relates to
LP:1 and so on. USB ports start at /dev/
mfp4, so scanner on USB:0 relates to /
dev/mfp4 respectively and so forth
sequentially. In the Selected port pane
you can see if the port is occupied by
some other application. If this is the
case, you should wait for completion of
the current job or should press Release
port button, if you are sure that the
present port's owner is not functioning
properly.
I cannot scan via Gimp • Check if Gimp Front-end has
Front-end.
"Xsane: Device dialog." on the "Acquire"
menu. If not, you should install Xsane
plug-in for Gimp on the your computer.
You can find Xsane plug-in package for
Gimp on Linux distribution CD or Gimp
home page. For the detail information,
refer to the Help for Linux distribution CD
or Gimp Front-end application.
If you wish to use other kind of scan
application, refer to the Help for
application.
Problem
I encounter error
"Cannot open port
device file" when
printing a document.
PDF file does not print
correctly-some parts
are missing in
graphics, text or
illustrations.
The machine does not
print.

Common Macintosh problems

Problem
PDF file does not print
correctly-some parts are
missing in graphics, text
or illustrations.
The document has
printed, but the print job
has not disappeared from
the spooler in
Mac OS 10.3.2.
Some letters are not
displayed normally
during the Cover page
printing.
14.20
<Troubleshooting>
Possible Cause and Solution
Please avoid changing print job
parameters (via LPR GUI, for example)
while a print job is in progress. Known
versions of CUPS server break the print
job whenever print options are changed
and then try to restart the job from the
beginning. Since Unified Linux Driver locks
port while printing, the abrupt termination
of the driver keeps the port locked and
therefore unavailable for subsequent print
jobs. If this situation occurred, please, try
to release the port.
Incompatibility between the PDF file and
the Acrobat products.
Printing the PDF file as an image may
enable the file to print. Turn on Print As
Image from the Acrobat printing options.
Note: It Will take longer to print when you
print a PDF file as an image.
The CUPS (Common Unix Printing
System) version distributed with SuSE
Linux 9.2 (cups-1.1.21) has a problem with
ipp (Internet Printing Protocol) printing.
Suggested solutions
Incompatibility between the PDF file and
the Acrobat products.
Printing the PDF file as an image may
enable the file to print. Turn on Print As
Image from the Acrobat printing options.
Note:
It Will take longer to print when
you print a PDF file as an image.
Update your Mac OS to OS 10.3.3. or
higher.
This problem is caused because Mac
OS can not create the font during the
Cover page printing. English alphabet
and numbers are displayed normally at
the Cover page.