Samsung SCX-4720FN User Manual page 40

If you want to use a parallel printer cable, purchase only an
IEEE-1284 compliant parallel cable and connect it to the
parallel connector on your machine.
Push the metal clips down to fit inside the notches on the
cable plug.
To the parallel port on your computer
N :
OTES
• You only need to connect one of the cables mentioned above. Do
not use the parallel and the USB cables at the same time.
• If you are using a USB cable, you must be running Windows 98/
Me/2000/XP, or Linux.
• The parallel port may not be available depending on your
country.
If you want to use a network cable, plug one end of the
Ethernet cable (UTP cable with RJ.45 connector) into the
Ethernet network port on the machine and the other end of
the cable into a network LAN connection.
To the network LAN connection
N
: You can configure the network parameters using the
OTE
control panel; see page B.5.
G S 2.13
ETTING TARTED
2