Up Or 4 Up Copying - Samsung SCX-4720FN User Manual

2-up copying
1 2
3 4
4-up copying
5.12 C
OPYING
3
Press Special Copy or the scroll button ( or ) until "2
sides in 1pg" displays on the bottom line.
4
Press Enter to make your selection.
5
If necessary, customize the copy settings, including number
of copies, darkness, and original type, by using the control
panel buttons. See "Setting Copy Options" on page 5.7.
6
Press Start to begin copying.
Your machine begins scanning the front side.
7
When "Set Backside" displays on the bottom line, open the
document cover and flip the document over. Close the
cover.
N
: If you press the Stop/Clear button or if no buttons are
OTE
pressed for approximately 30 seconds, the machine cancels the
copy job and returns to Standby mode.
8
Press Start again.

2 Up or 4 Up Copying

This copy feature is available only when you load documents in
the ADF.
1
Load the documents to be copied in the ADF.
2
Press Special Copy.
3
Press Special Copy or the scroll button ( or ) until "2
UP" or "4 UP" displays on the bottom line.
4
Press Enter to make your selection.
5
If necessary, customize the copy settings, including number
of copies, darkness, and original type, by using the control
panel buttons. See "Setting Copy Options" on page 5.7.
N
: You cannot adjust the copy size using the Reduce/
OTE
Enlarge button for making a 2 or 4 Up copy.
6
Press Start to begin copying.