Tait T02-00005-ABAA Installation Instructions

T02-00005-ABAA/T02-00005-ABBA
Keypad Microphones
Installation Instructions
Introduction
The T02-00005-ABAA and T02-00005-ABBA
keypad microphones plug into the microphone
socket on the graphical-display radio control
head, and enables users to make calls to other
radios, groups, or to a PABX or PSTN.
The types of call that you can make depends on
the way your radio has been programmed.
The T02-00005-ABAA and T02-00005-
ABBA keypad microphones can also be used
with TM8100 analog radios for channel
selection and DTMF calls.
The T02-00005-ABBA keypad microphone
has a longer 10ft (3m) cable.
As well as the PTT key, there are twelve
alphanumeric keys, two scroll keys, and a left and right selection key on the keypad
microphone. The selection keys and scroll keys duplicate the keys on the control head
and the 12 alphanumeric keys on the keypad microphone are used to dial call strings and
enter text.
The microphone button operates a hookswitch, which is closed when the microphone is
connected to the microphone clip, and open when the microphone is removed from the
microphone clip. The function of the hookswitch is determined by the way the radio is
programmed.
Operation
Dialing Characters
If an incorrect character has been dialed, use the left selection key on either the microphone
keypad or control head to clear it and move back one character.
Dialing Text Messages
When the keypad microphone is used to enter a text message, the microphone keys have
special functions. Use the
use the left selection key
© Tait Limited July 2013
www.taitradio.com
402-00081-01
left selection key left selection key
key to toggle between upper and lower case characters and
to delete a character from the display.
PTT key PTT key
scroll keys scroll
alphanumeric alphanumeric
keys keys
right selection key right selection key
grommet grommet