Rugged Computing RM-60 User Manual

**NOTE: This guide applies to radios purchased after 09/01/2018. Your
radio was pre-programmed and fully optimized before shipping to you.
Youʼre not required to use the guide. Go out and play!

Scan Mode:

Scan Mode allows you to scan through all of the programmed channels
to look for radio traffic.
• Press P5 to enter scan mode.

Keypad Lock/Unlock:

• TO LOCK/UNLOCK: Press and hold the P5 button on the radio for two
seconds. A small symbol will appear/disappear on the top right
corner of the display to confirm that the keypad is locked/unlocked.
Channel
Dial
Channel
Number
Rugged Radios
RM-60 60-WATT RADIO
USER GUIDE
Transmit
Function
Light
Button Function
Scan/Skip Squelch Adjust
Indicator Button
| www.ruggedradios.com
Push-to-Talk
No Power
Monitor
Button
Battery Voltage Scan &
Lock/Unlock
Button
Volume
Dial
Microphone Programming
Port
Port
| 888-541-7223