One for All URC7125 Simple Setup Manual

ESPAÑOL
ENGLISH
KEY TABLE
URC7125
MAGIC:
WATCH TV: Combines TV and
STB into one mode
SIMPLE SET UP GUIDE
MODE:
the devices your remote is
set up to control
FAV: Favourite Channels
GUIDE:
SMART:
and Smart features
of your TV or internet-
Open the battery door.
connected device
BACK: Back one step in
the Menu of the current device
VOL: Volume Up, Down and
16:9: Adjust the Aspect
Ratio (screen size) of your TV
Insert 2 AAA batteries.
LIST: Displays a list of
recorded programmes
ENGLISH
HOW TO SET UP YOUR REMOTE
A – SIMPLESET
SimpleSet is a quick and easy way of setting up the remote to control the most popular brands of
each device type with only a few key presses, typically in under a minute per device. The first step
is to select which device you are going to set up. The following is a list of Device Modes on the
remote control, and the Device types that can be set up on that mode:
Used to set up POWER:
your remote Power on/off
Device Mode
for TV viewing
TV
Scroll through
STB
For each Device type, there is a list of the top brands, each with a number assigned to it,
AV: Select the input on
for example 6 for a Samsung TV. Locate your device and brand in the list that follows:
the current device
TV
INFO: Displays info of
TV Guide, EPG
current playback 1
Alba / Bush / Goodmans
2
Grundig
3
LG
Access internet
4
Panasonic
5
Philips
EXIT: Exit from the Menu of
the current device
STB: Sat, Cable, DVB-T
MENU: Show the menu of
the current device
1
BSkyB / Sky Ireland / Orange
PP: Previous Program, Last
2
Canal+ / CanalSat / Digital+
Channel
3
Dream Multimedia / TechniSat
+/-: Channel Up and Down
Mute
4
DStv / Multichoice / Foxtel / Sky New
3D: Access 3D functionality if
Zealand
applicable
5
Freebox / Tricolor TV / Vu+
or Set Top Box
Red, Green, Yellow, Blue –
Fastext/Quick access keys
PLAYBACK: Playback keys
for the current device
HOW TO SET UP YOUR REMOTE
A – SIMPLESET
To set up your device
1.
Turn on your device (not on standby) and point the OFA remote towards it.
2.
Hold down MAGIC until the LED under the device blinks twice. The LED
under the current device will stay lit.
3.
Press the MODE key repeatedly until the LED for the device you want to
set up is lit.
Type of device
4.
Hold down the digit for your brand and device as listed above (e.g. 6 for
TV, HDTV, LED, LCD, Plasma, Projector Samsung TV).
5.
Set Top Box, Satellite Receiver, Cable Converter, The remote will send Power every 3 seconds until your device switches off.
Freeview, DVB-T, IPTV
6.
As soon as your device switches off, release the digit.
7.
The LED will blink twice and go out. The remote should now operate your device.
• If you find one or more keys do not work as you expect, start again at step 1 – the remote will
start with the next code in the memory.
6
Samsung
7
Sharp
8
Sony
9
TCL / Thomson
0
Toshiba
6
Humax
7
Samsung
8
Sky Italia / SFR / Neuf TV
9
Sky Deutschland / Österreich /
T-Home / Deutsche Telekom
0
UPC / Cablecom / UPC Direct /
Virgin Media
ESPAÑOL
HOW TO SET UP YOUR REMOTE
B – SET UP BY CODE
If your brand is not listed in section A, you can set up your device by trying codes individually.
To do this:
1.
Turn your device on (not on standby).
2.
Locate the brand of your device in the code list (pages 146-157). Codes
are listed by Device Type and Brand.
3.
Hold down MAGIC until the LED under the device blinks twice. The LED
under the current device will stay lit.
4.
Press the MODE key repeatedly until the LED for the device you want to
set up is lit.
5.
Enter the first 4 digit code listed for your brand (e.g. 0556 for a Bennett
TV).
6.
The LED will blink twice and go out.
7.
Now aim the remote towards your device and press the POWER key.
8.
If the device turns off, your remote is ready to use. If not, repeat steps 3-7 with the next code
in the list.
• Some codes are quite similar. If you find that one or more keys do not operate as you expect,
try again from step 3 with the next code in the list.