Carry out the following steps on both
doors.
Removing the soft-close mechanism
The soft-close mechanism
snaps shut when dismantled.
Place the door with the outer side
downwards on a stable surface.
Remove the soft-close mechanism
from the ball joint.
Unscrew the mounting and remove
the soft-close mechanism .
Changing the door hinging
Unscrew the ball joint and screw it
into the adjacent hole.
Now turn over the appliance door so
that the outer side faces upwards
(hinges remain open).
Do not close the hinges.
Undo the screws .
Place each hinge on the diagonally
opposite side
77