Pioneer BR-95D Operating Instructions

Operating
Instructions
REMOTE CONTROL
BR-95D
© 1998
Pioneer New Media Technologies, Inc.
2265 East 220th Street
Long Beach, California USA 90810
telephone: (310) 952-2111
web site: http://www.pioneercatv.com
‹C 010 BSIA›
Read this first
The BR-95D controls all functions of the Pio-
neer BA-9000 Series home terminals, as well
as your TV's power, volume and mute func-
tions.
Batteries
The BR-95D uses two
AAA alkaline batteries. To
install the batteries,
1 Press on the ridged
area and slide the
battery compartment
lid off.
2 Insert two new AAA
alkaline batteries as
shown inside the bat-
tery compartment.
3 Replace battery cover.
Make sure the cover
"snaps" into place.
BR-95D Keypad
Refer to the diagram in the far left column.
1 TV POWER
Turns your TV on or off.
2 CATV POWER
Turns the home terminal on or off. May also
turn convenience outlet on and off. Refer to
the home terminal's Operating Instructions.
3 VOL + / –
Turns the sound level up or down.
4 MUTE
Reduces volume to minimum level.
5 MENU, CURSOR, ENTER
On-screen display navigation.
6 ORDER
Purchase pay-per-view programming.
7 RED INDICATOR LIGHT
Blinks when a key is pressed to indicate remote
is working. Assists in setting up the remote.
8 SETUP
Programs the remote to operate the TV on/off
and volume functions.
9 A/B
Controls the signal to the TV set, via the op-
tional Bypass Adapter.
Refer to the Bypass Adapter instruction
manual for details.
10 CHANNEL /
Changes the channel on the terminal.
11 0 — 9; LAST CH, FAV CH RECALL
Direct channel/numeric entry keys.
Setup steps
To set up your BR-95D to operate your TV's
power, volume and mute functions, first lo-
cate your TV model in the Setup Codes table
on the other side of this sheet, and make
note of the three-digit setup code(s).
Now follow these simple steps:
1 Turn on your TV.
2 Press and hold the SETUP key until the
red light blinks twice.
3 Enter the first three-digit setup code. The
red light blinks twice after the last digit.
4 Aim the BR-95D remote at the TV.
5 Press TV POWER. The TV should turn off.
If the TV does not respond,
1 Repeat the above steps, using the re-
maining three-digit codes (if any) in step
3.
2 If the TV still fails to respond, and no
codes appear to work, try the Search
Method later in this manual.
Store your code
Important! When you find the code that oper-
ates your TV, write it in the spaces below, or
in the space provided on the BR-95D's rear la-
bel, for future reference.
Search method
If the TV didn't respond to the Setup Steps,
use this Search Method:
1 Turn on your TV.
2 Press and hold the SETUP key until the
red light blinks twice.
3 Press 9 9 1. The red light blinks twice after
the last digit.
4 Aim the BR-95D remote at the TV.
5 Press TV PWR. If the TV turns off, STOP .
Press SETUP to lock in that code. If the
TV does not turn off, press CH
PWR again and again until the TV turns
off. Proceed to Getting the TV Code.
then TV