System - EEG HD1492 Product Manual

3.2.1 System

The System tab contains network configuration and general setup fields.
MAC Address
Configuration
IP Address
Subnet Mask
Gateway
Serial Port P1 Mode
Timecode Source
HD1492 HD Encoder Frame Card
Displays the encoder's MAC address.
Selects between static and DHCP network
settings.
Selects the IP address the unit will be as-
signed on your LAN (read-only in DHCP
mode).
Selects the bit mask used; this should
match the mask used on your LAN (read-
only in DHCP mode).
Selects the address of the device that the
unit will use to communicate outside of
your LAN (read-only in DHCP mode).
Selects the signaling mode used by the P1
serial port; options are RS-232, Sony-style
RS-422, and EEG-style RS-422.
Selects the timecode source for any appli-
cations requiring it; options are ANC VITC,
DVITC Master, and DVITC Aux.
11