EEG HD1492 Product Manual page 11

HD1492 HD Encoder Frame Card
currently loading an upgrade.
The lower section entitled Product displays identifying information about
the hardware and software versions of the card. This section displays
the supplier, the build number, the firmware number, and the ASW ver-
sion to identify the software installed and the serial number of the card.
The setup section in the right half of the tool is broken up into mul-
tiple tabs: System, iCap, Encoding, SCTE-104, TCP/IP , and CCMatch.
Note that the SCTE-104 and CCMatch tabs will only be present if your
HD1492 has been licensed to use the respective software modules.
10