Wireless Mode - Q-See QCW4MP1PT-AU User Manual

Plug the camera into a power source and wait
until the indicator light begins to ash. After
15-30 seconds the light should slowly ash
green which indicates it is ready to con gure.
If the light displays solid red, hold the reset
button for 15 seconds
At this stage you must connect the app to your camera. There are two ways to do
this; either via wi (wireless mode) or with a directly connected ethernet cable
(wired mode). Chose step 3 below if you wish to use wireless mode or skip step 3
and go to step 4 if you wish to use wired mode.
3
Add QCW4MP1PT-AU to Q-See Plus App

Wireless Mode

After login using your Q-see account, press
+ symbol to proceed to
located at bottom of Wi PTZ camera
*please grant the Q-see plus app permis-
sion to use your mobile phone's camera*
scan the QR code
3