Advertisement
ATTACHING THE HAND STRAP TO THE TABLET
The Dock will accommodate tablet with hand strap or extended battery module but not both.
Below is the correct way to attach the hand strap to the tablet so that it functions properly
with the docking station.
Below is an example for INCORRECT way to attach the hand strap to the tablet.
Figure 1
Figure 3
Figure 2
Figure 1: Plastic clip run over the outline of the laptop
Figure 2: Plastic clip run over the outline of the laptop
and No space between edge of the tablet and edge
of the hand strap
Figure 3: The clip/strap on the bottom is loose
Step 1: Leave at least .250"
space between the edge
of the tablet and the hand strap
edge.
Step 2: Make sure that the
plastic clips do NOT run over the
outline of the hand strap.
Step 3: The strap/clip on the
bottom should be tight.
4 / 6
Advertisement
