Inserting the Remote Control Batteries
Installing the Remote Control Holder
8
E-
You must insert or replace the remote control batteries when :
You purchase the air conditioner
The remote control does not work correctly
N N
o o
t t
e e
Use two AAA, LR03 1.5V batteries.
N N
o o
t t
e e
Do not use old batteries or different kinds of batteries together.
Batteries may be completely discharged after 12 months, even
if they have not actually been used.
1
Push the battery cover on the rear of the remote control with your thumb
in the direction of the arrow and remove it.
2
Insert the two batteries, taking care to respect the polarities :
+ on the battery with + on the remote control.
- on the battery with - on the remote control.
3
Close the cover by sliding it back until it clicks into place.
1
Place the remote control holder on the wall.
2
Fix the remote control holder by tightening the screws.
3
Put the remote control into the holder as shown in the figure.
If you want to install the holder easily, you had better install the holder
on the wooden frame.