Adjusting Your Monitor Image; Using The Direct Access Controls - Lenovo ThinkVision P32u-10 User Manual

Adjusting your monitor image

This section describes the control features to adjust your monitor image.

Using the direct access controls

The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
*Note:
One Key Switch: Press
Icon Control
One Key Switch
1
Exit
DDC-CI
Input Change
HDMI2.0/
HDMI1.4 Switch
2
Increase
Up
Brightness
Down
3
DP1.2/DP1.1
Switch
Menu
4
Enter
Press
Thunderbolt
Description
Select "1" is Thunderbolt™ port USB-C
function, select "2" is HDMI1/HDMI2/DP port
USB-B function
Exit from menu and return before menu
Press and hold for 10 seconds to enable or
disable the DDC-CI function
Switches the video input source
For HDMI1 Port, press and hold for 5 seconds
will switch from HDMI2.0 to HDMI1.4
For increasing the value on adjustment bar/tune
In press to move to next item
Right browsing key
Direct access to Brightness adjustment
Down key function and down circle
For DP port, press and hold for 5 seconds will
switch from DP1.2 to DP1.1
To access OSD menu
Press to confirm selection
Press and hold for 10 seconds will lock menu/
unlock menu
Press to enter next level on main menu/
sub menu status or enter previous level on
adjustment bar
and select "1" to be Thunderbolt™ port USB-C function.
and select "2" to be HDMI1/HDMI2/DP port USB-B function.
·1 2·
USB Type-B
2-3
Chapter 2.