Black Box RS-VIEWER User Manual page 15

CHAPTER 3: BASIC CONFIGURATION OF THE RS-VIEWER
The RS-VIEWER unit requires automatic synchronization of its clock with the internet (NTP) servers. If you want to change the
setting of the internet time servers, select "Internet clock." Here you can change the names or IP addresses of the primary NTP
server and the secondary NTP server. The default setting of the servers is "time.nist.gov" and "tak.cesnet.cz". Be sure to click the
"Apply" button for any changes to become effective.
If you are using the RS-VIEWER Essential Setup, continue with the settings using this guide. The procedure for setup using
RS-MODERATOR On-premises Administration is described in the RS-MODERATOR user manual.
FIGURE 3-14. TIME ZONE TAB
FIGURE 3-15. INTERNET CLOCK TAB
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
15