Black Box RS-VIEWER User Manual page 13

CHAPTER 3: BASIC CONFIGURATION OF THE RS-VIEWER
If your LAN is secured using 802.1X, select the "802.1X" tab at the top. Supported authentication methods are MD5 and TLS.
Type "Device identity" in the appropriate box.
If you are using MD5 authentication, check the appropriate checkbox and enter the password for MD5 authentication.
If you are using TLS authentication using certificate, check the appropriate checkbox. Then tap the "Choose file" button next to "User
certificate," select the user certificate file and upload it. The following certificate types are supported: PKCS #12 and x509 (PEM,
DER). You can also upload a private key file if the private key is not part of the user certificate. If the user certificate or private key is
encrypted, enter the password to decrypt it in the "Password (optional)" box.
In the CA certificate entry, upload the Radius server CA Certificate.
Click "Apply" to save the changes.
If the proxy server is mandatory to access HTTPS servers on your network, select the "Proxy" tab on the top. Enter Address and
Port of the proxy server. If the proxy server requires authentication, enter the credentials for the proxy server in the "Login" and
"Password." Finish the settings by tapping "Apply + Restart." The panel will now restart and the new IP settings will be used.
FIGURE 3-11. 802.1X TAB
FIGURE 3-12. PROXY TAB
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
13