Ip Settings - Black Box RS-VIEWER User Manual

CHAPTER 3: BASIC CONFIGURATION OF THE RS-VIEWER

3.4 IP SETTINGS

Using the Admin Web, you can change the IP settings. In the left menu, choose "Configuration." If you choose "Identification," you
can change the "Magic name," which is the unique name of a unit used in communication between reservation suite units. It is
factory-set and in most cases needs not be changed. If you do need to change it, you have to make sure the new name is unique
within the given local network.
All changes made through the Admin Web have to be confirmed by pressing the Apply button before leaving the page, otherwise
changes will not be saved.
To change IP addresses, select "IP settings" on the top of the screen. The currently used setting is displayed in the upper part of
the page.
By checking the box "Use DHCP to obtain IP address," you enable automatic assignment of an IP address through the DHCP server.
FIGURE 3-7. DISCONNECT FROM RESERVATION SUITE SCREEN
FIGURE 3-8. CHANGE MAGIC NAME SCREEN SCREEN
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
11