Connectors provide IP68 protection but should not be continually exposed to water (e.g. immersed
under water) and not placed directly on the top side.
Connecting to PV panel (DC input):
Figure 16
1.
Wire stripping 7mm
2.
Insert the wire into the core with pliers pressure;
3.
The core penetration into the terminal internal until clamping, then tighten the nut
The Solar Family Series Inverter
20
The Solar Family Series Inverter
Figure 17
Connecting to the grid:
1.Measure grid voltage and frequency to see whether they are normal.
2.Open the breaker or fuse between inverter and utility grid.
3.Connect AC wires of inverter as follows:
21