Selecting The Automatic Operating Mode - Samsung ACH1800E Owner's Instructions Manual

Selecting the Automatic Operation Mode
In the Automatic mode, the room temperature and the fan speed are
controlled automatically.
1 If necessary, press
Result: The On/Off indicator on the unit comes on.
The air conditioner runs in the mode selected when
the unit was last used.
The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2 To select the AUTO mode, press the Mode button until
at the top of the wireless remote controller.
Result: The indoor unit beeps.
The air conditioner runs in AUTO mode.
N N N N o o o o t t t t e e e e You can change modes at any time.
3
To adjust the temperature, press the Temperature buttons one or more times
until the required temperature is displayed. Possible temperatures are between
O O
18 C and 30 C inclusive.
Result: Each time you press Temperature buttons:
- The temperature is adjusted by 1
The air conditioner takes the present temperature of the room
every 30 minutes.
- If the temperature is higher than the selected temperature +
the air conditioner will start cooling.
- If the temperature is lower than the selected temperature - the
air conditioner will start heating.
N N o o t t e e The is a preset temperature for the most comfortable
N N o o t t e e
environment. It can be adjusted by your installation
specialist when installing the product.
(ON/OFF) button.
O
C.
is displayed
21
E-