Additional Operations - Sony TA-K800AV Manual

Additional Operations

Recording
POWER
Input selectors
and indicators
Tip
• If the amplifier is connected
to recording components,
such as a tape deck or MD
recorder, you can record the
same source on both
components at the same
time.
Additional Operations
12
-EN Basic Operations
This section shows you how to record the program source and your
karaoke play.
1
Press POWER to turn on the amplifier.
The indicator on MASTER VOLUME
flashes and then lights up. In this state,
MASTER
VOLUME
the N position of the KEY CONTROL
indicators and the previously selected
input selector light up.
3
Turn on the program source you
want to record.
4
Press the input selector (VCD/LD, VCR, CD,
MD, TAPE or TUNER) of the program
source to be recorded.
The indicator above the selector you
pressed lights up.
To record a
Video CD or Laser disc
Video tape
CD
MD
Cassette tape
Radio broadcast
5
Prepare the recording component
for recording, then start
recording.
Recording your karaoke play
When you sing into the microphone, your voice mixed with the music
accompaniment is output from all OUT jacks of the rear panel. Thus,
you can record your karaoke play with the recording component.
The following effects are also output:
MIC (1, 2, 3) VOL, ECHO, MUSIC VOL, SURROUND and KEY
CONTROL.
Your karaoke play using MPX and KARAOKE PON can also be
recorded.
Press
VCD/LD
VCR
CD
MD
TAPE
TUNER
TA-K800AV.3-810-853-11 (En, C1, C2)