Advertisement
Quick Links
ENglISh
1
GB
p
5
FRENCh
F
p
9
gERmAN
D
p
SPANISh
13
S
p
PoRTUgUESE
17
P
p
WARNING:
Do nOT change any
other settings within
these menus. Changing
other settings may
cause your EziWeigh
indicator to malfunction.
www.tru-test.com
EziWEigh UsEr manUal
ImPoRTANT: Follow the instructions below before using EziWeigh.
Start Up
Instructions for setting user language on EziWeigh 1 and 2 indicators:
1. Connect the indicator to a power supply.
2. Press
to turn on the indicator.
3. When the display window shows
4. Press
repeatedly to scroll through the menu until you reach
5. Press
repeatedly to scroll through the menu to find your language:
↪
→
English
6. Press
to save.
Instructions for setting weighing units on EziWeigh 1 and 2 indicators:
1. Press
to turn on the indicator.
2. When the display window shows
The word
should display on the screen.
3. Press
to change between
4. Press
to save.
Installation
1. Install load bars under the platform on a firm,
level surface (see Load Bar User Manual).
2. Mount indicator bracket in a convenient
place where animals cannot knock the
indicator off or chew the cables. The
bracket mounts onto flat surfaces (timber
rails, concrete) or pipe-work with the
supplied U-bolt.
3. Connect load bar cables to the indicator.
Connect dust caps as shown. The indicator
automatically calibrates to Tru-Test load bars.
4. Connect power cable (if needed).
Power connector for connecting
12 V vehicle battery (red clip to
positive terminal) or Tru-Test power
adaptor. To connect power adaptor,
pull battery clips off indicator lead
and plug lead into power adaptor
lead (red to red). The power cable
is permanently connected to non-
battery indicators.
, press
→
French
Spanish
, press
(pounds) and
Dust caps screw together to keep out dirt and moisture when cables are connected
to indicator. Screw back on indicator/cables when cables removed.
(See diagram below for position of hidden keys)
and
together.
.
→
→
German
and
together.
(kilograms).
W O R L D L E A D E R S I N W E I G H I N G
↩
Portuguese
Load cell
connectors
p 1
Advertisement
Related Manuals for Tru-Test EziWeigh
Summary of Contents for Tru-Test EziWeigh
- Page 1 PoRTUgUESE ImPoRTANT: Follow the instructions below before using EziWeigh. Start Up WARNING: Instructions for setting user language on EziWeigh 1 and 2 indicators: Do nOT change any (See diagram below for position of hidden keys) other settings within 1. Connect the indicator to a power supply.
- Page 2 FUNCTIoNS Stable light shows weight is stable. Turns indicator off. Shows displayed weight Locks weight until has been locked using next animal is key. weighed, or is pressed. HOLD annunciator is on when weight is locked. Turns indicator on. Returns indicator to live weight display.
- Page 3 Charge level. Battery is low. Charge level. Battery is fully charged. It is safe to leave on charge. Scale needs service. Note the error number and contact TRU-TEST. External power supply too high. Check power supply. External power supply too low. Voltage too low to charge.
- Page 4 FCC Notice This Tru-Test model EziWeigh has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is used in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the EziWeigh and is the answer not in the manual?
Questions and answers
When the display says HVOLT. Does that mean the power source is too high for the eziweigh display